Porcelain Floor Tiles for Residential & Commercial Spaces

Start the laying study with measured room dimensions and the intended joint width. Compare an aligned grid, offset layout and any directional pattern against the actual product guidance. Check the width of perimeter cuts and the relationship to doors, columns and built-in cabinetry. A grid that looks balanced in one room can leave a narrow strip in the next. Where spaces connect, decide whether the grid continues or changes at a designed transition. Keep structural movement provisions in the layout and ask the installer to confirm the final setting-out rather than treating a tile count as an installation drawing.

• Approve the first visible setting-out axis.
• Calculate cuts by room and layout rather than area alone.

A reception lobby, hotel bathroom, apartment corridor and sheltered entrance are not interchangeable floor uses. Identify the likely wet conditions, footwear, cleaning frequency and local requirements, then request the relevant results for the selected tile finish. Test methods describe particular conditions; a rating from one method should not be casually converted into another. The project specifier should decide which evidence applies. Also review texture and grout colour with the maintenance team, because appearance during daily service matters as much as the first photograph after installation.

• List wet, dry and transitional zones separately.
• Match every report to its actual surface finish.

Tiles may be distributed to several rooms before anyone notices that a package belongs to a different shade or dimensional group. Agree how cartons and pallets will be checked at receipt and separated before laying. The installer should review the delivered material before fixing, with any concern raised through the agreed process. Retain spare tiles in clearly identified packaging linked to the installed room or zone. For the handover, document the initial clean, permitted cleaning products and the treatment of construction residues according to the tile and grout manufacturers’ instructions.

• Keep shade and dimensional-group labels available.
• Store repair stock with the room schedule.